- Home /
- NSN Parts Catalog /
- Electrical and Electronic Equipment Components /
- Capacitors /
- 5910-01-617-1860
5910-01-617-1860
Ceramic Dielectr Fixed Capacitor
- NSN
- 5910-01-617-1860
- FSC
- 5910 -Capacitors
- NIIN
- 01-617-1860
- Description
- Ceramic Dielectr Fixed Capacitor
- DEMIL
- DEMIL/MLI
- INC
- 00007
- Assigment Date
- Thu, Mar 14, 2013
- Schedule B Code
- 8532290040
- End Item Identification
- b-1
- Body Diameter
- 0.08 inches minimum and 0.10 inches maximum
- Body Length
- 0.150 inches minimum and 0.170 inches maximum
- Body Style
- w/o mtg facilities, axial terminals
- Capacitance Value Per Section
- 13.0 picofarads single section
- Material
- plastic case
- Nonderated Operating Temp
- -55.0 celsius minimum and 125.0 celsius maximum
- Nonderated Continuous Voltage Rating And Type Per Section
- 200.0 dc single section
- Reliability Indicator
- established
- Reliability Failure Rate Level In Percent
- 1.0
- Schematic Diagram Designator
- no common or grounded electrode(s)
- Specification/Standard Data
- 81349-mil-prf-20/27 government specification
- Terminal Diameter
- 0.015 inches minimum and 0.021 inches maximum
- Terminal Length
- 1.250 inches minimum
- Terminal Type And Quantity
- 2 uninsulated wire lead
- Test Data Document
- "81349-mil-prf-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius
- -60.0 to 60.0 single section
- Tolerance Range Per Section
- -1.0 to 1.0 picofarads single section
Material and Special Handling
Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.
-
HMICHAZMAT (Hazardous Material)
-
PIndicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
-
PMICPrecious Metals
-
AItem does not contain precious metal.
-
CRITLCriticality Code
-
XThe item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
MILSPEC
| Spec. Type | Spec. | Color | Gloss | Size |
|---|---|---|---|---|
| Test Data Document | MIL-PRF-20 |
Manufacturers and Part Numbers
| Part Number | Brand |
|---|---|
| CCR75CH130FM | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
Major Organizational Entities (MOE)
| Entity | MOE Code | MOE Rule | PICA | DSOR |
|---|---|---|---|---|
| Department of the Air Force | DF | FXGX | GX |
-
Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
-
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
-
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)
Plate Self-Locking Nut
Round Plain Nut
Compression Helical Spring
Compression Helical Spring
Hollow Pin
- ISO9001 / AS9100
- On-Time Delivery Record
- Counterfeit Parts Prevention System
- ASA (Aviation Suppliers Association) Member