1. Home /
  2. NSN Parts Catalog /
  3. Electrical and Electronic Equipment Components /
  4. Capacitors /
  5. 5910-01-246-0372

5910-01-246-0372

Ceramic Dielectr Fixed Capacitor

NSN
5910-01-246-0372
NIIN
01-246-0372
Description
Ceramic Dielectr Fixed Capacitor
DEMIL
DEMIL/MLI
INC
00007
Assigment Date
Mon, Dec 8, 1986
Schedule B Code
8532290040
Body Height
0.140 inches nominal
Body Length
0.480 inches nominal
Body Width
0.480 inches nominal
Body Style
w/o mtg facilities terminal(s) on one surface
Capacitance Value Per Section
56000.000 picofarads single section
Center To Center Distance Between Terminals Parallel To Length
0.400 inches nominal
Dissipation Factor At Reference Temp In Percent
0.150
Insulation Resistance At Maximum Operating Temp
10000.0 megohms
Insulation Resistance At Reference Temp
100000.0 megohms
Material
plastic case
Nonderated Operating Temp
-55.0 celsius minimum and 125.0 celsius maximum
Nonderated Continuous Voltage Rating And Type Per Section
50.0 dc single section
Reliability Failure Rate Level In Percent
0.001
Reliability Indicator
established
Schematic Diagram Designator
no common or grounded electrode(s)
Specification/Standard Data
81349-mil-prf-20 government specification
Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius
0.0 single section
Terminal Diameter
0.025 inches nominal
Terminal Length
1.250 inches minimum
Terminal Surface Treatment
solder
Terminal Type And Quantity
2 uninsulated wire lead
Test Data Document
"81349-mil-prf-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Tolerance Range Per Section
-2.00 to 2.00 percent single section
Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius
-30.0 to 30.0 single section

Material and Special Handling

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC
HAZMAT (Hazardous Material)
P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC
Precious Metals
A
Item does not contain precious metal.
CRITL
Criticality Code
X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

MILSPEC

Spec. Type Spec. Color Gloss Size
Test Data Document MIL-PRF-20

Manufacturers and Part Numbers

Part Number Brand
638-C1CH563-KM Allied Signal Inc Aerospace Equipment Systems Eatontown Site
CCR07CG563GR Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
CCR07CG563GS Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
CCRQ7CG563JR Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Major Organizational Entities (MOE)

Entity MOE Code MOE Rule PICA DSOR
Department of the Army DA A918 GX
Department of the Navy DN N9BN GX
Department of the Air Force DF FXGX GX
Canada ZC ZC01 ZC

Packaging and Dimensions

PICA SICA Package Size Package Weight Part Weight Part Dimensions
P 0000 X 0000 X 0000 0000.1 .
PICA SICA Container OPI SPI No. SPI Rev.
P ZZ M
PICA SICA SPC Mkg. LVL A LVL B LVL C
P ZZ Q Q
PICA SICA CUSH MOP CATEG. PRESS MAT
P ZZ ZZ 69F0 ZZ
PICA SICA WRAP MAT ICQ THK TOS
P ZZ XXX C A
Packaging Code Definitions
LVL_A: Q
Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL_B: Q
Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
OPI: M
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
SPC_MKG: ZZ
Special requirements.
MOP: ZZ
See j.4.1.b.
CUSH_DUN: ZZ
Special requirements. See specific instructions or drawings provided.
PRES_MAT: ZZ
Special requirement. See specific instructions or drawings provided.
Export Restrictions
  • Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.

  • Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.

  • The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

5310-01-322-8747
5310-01-322-8747

Seal Washer

5340-01-066-9671
5340-01-066-9671

Clamp Bolt Assembly

5325-00-851-4150
5325-00-851-4150

Metallic Grommet

5310-01-322-8747
5310-01-322-8747

Seal Washer

5325-00-291-0286
5325-00-291-0286

Metallic Grommet

Price Quote

Our Guarantee
  • ISO9001 / AS9100
  • On-Time Delivery Record
  • Counterfeit Parts Prevention System
  • ASA (Aviation Suppliers Association) Member

Similar MILSPEC

5910-01-221-7851
MIL-PRF-20 Ceramic Dielectr Fixed Capacitor
5910-01-224-6157
MIL-PRF-20 Ceramic Dielectr Fixed Capacitor
5910-01-231-8554
MIL-PRF-20 Ceramic Dielectr Fixed Capacitor
5910-01-246-0372
MIL-PRF-20 Ceramic Dielectr Fixed Capacitor
5910-01-321-7167
MIL-PRF-20 Ceramic Dielectr Fixed Capacitor

NSN Inventory Stock

5325-01-114-1507 Screw Thread Insert
06/10/2026 08:06 AM EDT
Stock: 327
5961-01-012-6688 Transistor
06/10/2026 08:06 AM EDT
Stock: 13
1610-01-096-7677 Aircraft Propeller
06/10/2026 08:06 AM EDT
Stock: 4
2620-01-168-0164 Aircraft Pneumatic Tire
06/10/2026 08:06 AM EDT
Stock: 76
5320-00-952-4160 Blind Rivet
06/10/2026 08:06 AM EDT
Stock: 636
1005-00-200-5800 Helical Spring
06/10/2026 08:06 AM EDT
Stock: 3269
5640-01-624-6748 The Insulation Felt
06/10/2026 08:06 AM EDT
Stock: 2
9320-01-340-3644 Solid Rubber Sheet
06/10/2026 08:06 AM EDT
Stock: 22
5905-01-176-7349 Film Fixed Resistor
06/10/2026 08:06 AM EDT
Stock: 818