6625-01-118-7185

Description: Oscilloscope

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Electrical And Electronic Properties Measuring And Testing Instruments

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

6625-01-118-7185 Properties

  • NSN:
    6625-01-118-7185
  • Description:
    Oscilloscope
  • Shelf Life:
    N/A
  • DEMIL:
    DEMIL/MLI
  • UOM:
    EA
  • Overall Length:
    17.250 inches
  • Overall Height:
    7.625 inches
  • Overall Width:
    12.500 inches
  • Current Type:
    Ac
  • Direct Current Rating In Amps:
    0.36 and 0.18
  • Frequency Rating:
    45.0 hertz and 440.0 hertz
  • Joint Electronics Type Designation System Item Name:
    Oscilloscope
  • Joint Electronics Type Designation System Item Type Number:
    0s-257a/ur
  • Voltage Rating:
    115.0 volts and 230.0 volts
  • Beam Quantity:
    1
  • Graduation Interval:
    Graduated in v/cm on y axis and time/cm on x axis
  • Mounting Method:
    Rack
  • Accuracy Range In Percent:
    -2.0/+2.0
  • Screen Size:
    8 by 10 centimeters
  • Sweep Circuits:
    Included
  • Generator Driven Feature:
    Included
  • Sweep Circuit Type:
    Horizontal
  • Sweep Frequency Range:
    +0.0/+20.0 megahertz
  • Single Trigger Sweep Duration:
    Between 0.050 seconds and 2.5 seconds
  • Trigger Sweep Voltage Amplitude Rating:
    300.0 megavolts
  • Trigger Sweep Polarity Switch:
    Included
  • Trigger Sweep Marker Intervals:
    0.1 sec, 0.2 sec, 0.5 sec, 1.0 sec; 0.1 ms, 0.2 ms, 0.5 ms, 1.0 ms, 2.0 ms, 5.0 ms, 10.0 ms, 20.0 ms, 50.0 ms ; 0.5 us, 1.0 us, 2.0 us, 5.0 us, 10.0 us, 20.0 us, 50.0 us
  • Expanded Sweep:
    Not provided
  • Amplifier Deflection Sensitivity Provision:
    Provided
  • Vertical Deflection Sensitivity Voltage Rating:
    0.005 volts rms per centimeter and 20.0 volts rms per centimeter
  • Horizontal Deflection Sensitivity Voltage Rating:
    15.0 volts any acceptable minor
  • Input Intensity Modulation Feature:
    Provided
  • Visual Modulation Sensitivity Voltage Rating:
    2.0 volts
  • Visual Blanking Sensitivity Voltage Rating:
    60.0 volts
  • Plate Direct Connection Deflection Sensitivity Provision:
    Provided
  • Direct Connection Vertical Deflection Sensitivity Voltage Rating:
    7.0 volts any acceptable outside diameter
  • Direct Connection Horizontal Deflection Sensitivity Voltage Rating:
    15.0 volts rms per inch
  • Frequency Response Rating:
    Provided
  • X-axis Frequency Response Rating:
    Between 2.0 hertz and 5000.0 hertz
  • Y-axis Frequency Response Rating:
    Between 0.0 megahertz and 15.0 megahertz
  • Z-axis Frequency Response Rating:
    Between 500.0 hertz and 0.500000 hertz
  • Amplifier Input Impedance Rating Provision:
    Provided
  • X-axis Input Impedance Rating:
    10000.0 ohms
  • Y-axis Input Impedance Rating:
    1.0 megohms
  • Z-axis Input Impedance Rating:
    1.0 megohms
  • Amplitude Calibrating Voltage Waveform:
    Square wave
  • Calibrating Peak To Peak Amplitude:
    1.0 volts
  • Measurement Range Quantity:
    1
  • Measurement Range Steps:
    5mv to 20v steps
  • Calibrated Screen Scale:
    Included
  • Trace Storage Tube:
    Not included
  • Camera Recording Device Accommodation:
    Provided
  • Phase:
    Single
Manufacturers and Part Numbers
Part Number
Brand
2003139-1
Ballantine Laboratories
0S-257A/UR
Joint Electronics Type Designation
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N2H4
PICA:
HD
DSOR:
99
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00357
FIIG:
T320-G
Concept No.:
App. Key:
GA
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
U
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): U
Precious metal content is unknown
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
19.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
ED
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
03
LVL A:
E
LVL B:
F
LVL C:
F
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
GH
MOP:
51
CATEG.:
80Z0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
JA
ICQ:
000
THK:
H
TOS:
A
UCL:
B
Packaging Code Definitions
LVL A Code (LVL_A):E
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL B Code (LVL_B): F
Packing is not required. the unit container shall also serve as the shipping container. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Procedure Indicator Code (OPI): M
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special Markings Code (SPC MKG): 03
Method 50.
Method of Preservation (MOP): 51
Watervaporproof bag, sealed.
Cushion Material (CUSH): GH
Mil-prf-26514, type i, class 2, grade c, flexible polyurethane foam, heavy load range.
Preservation Material (PRESS MAT): 00
No requirement.