6625-00-539-9030

Description: Radio Test Set

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Electrical And Electronic Properties Measuring And Testing Instruments

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

6625-00-539-9030 Properties

  • NSN:
    6625-00-539-9030
  • Description:
    Radio Test Set
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    --
  • Width:
    20.000 inches
  • Length:
    18.300 inches
  • Ac Voltage Rating:
    126.500 volts
  • Frequency Rating:
    50.000 hertz
  • Major Components:
    Badapter, test; attenuator, fixed, cable assembly, power electrical; case, test set; connector; cord; coupler-detector, radio frequency; dummy load, electrical; generator, sweep; network, impedance matching; prod test
  • Accessory Component Quantity:
    1 and 1 and 9 and 1 and 1 and 1 and 1 and 1 and 1 and 1 and 1
  • Accessory Controlling Agency:
    Jcens and jcens and jcens and jcens and jcens and jcens and jcens and jcens and jcens and jcens and jcens
  • Accessory Identifying Number:
    Mx-1982/trm-3 type no. And cn-374/trm-3 type no. And cx-3277/u type no. And cy-1941/trm-3 type no. And ug-491a/u type no. And cg-409a/u type no. And cu-506/trm-3 type no. And da-138/trm-3 type no. And sg-24/trm-3 type no. And mx-1983/trm-3 type no. And mx1981/trm-3 type no.
  • Internal Battery Accommodation:
    Not included
  • Material And Location:
    Aluminum carrying case
  • Inclosure Feature:
    Single item w/carrying case
  • Test Type For Which Designed:
    Alignment of radio frequency circuits
  • Operating Test Capability:
    Sweep generator, range 15 to 400 mc, output oil to 100, 000 uv, internal modulation 400 cycles
  • Phase:
    Single
  • Functional Classification:
    Aa-6.3
  • Functional Description:
    Designed to provide modulated and continuous wave signals at low to very low power levels. Used in testing, calibrating, aligning and setting gain adjustment in intermediate stages of radio equipment. Is intended for use at intermediate and depot levels of maintenance
  • Height:
    21.000 inches
  • Reference Data And Literature:
    Handbook, operating instructions: navar-16-30 trm-3-501; handbook, service instructions: navaer-16-30 trm-3-502; handbook, overhaul instructions: navaer-16-30 trm-3-503; illustrated parts breakdown: navaer-16-30 trm-3-504
  • Type/model Designation:
    An/trm-3
Manufacturers and Part Numbers
Part Number
Brand
ANTRM3
Joint Electronics Type Designation
0132-01402
Entron Industries Limited
K00000244
Entron Industries Limited
SG24TRM3
Gilbert Engineering Co /on
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
FRANCE France
MOE_CD:
ZF
MOE_RL:
ZF01
PICA:
ZF
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
03662
FIIG:
T228-A
Concept No.:
1
App. Key:
AA
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
A
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
9,999.9000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
ED
OPI:
O
SPI No.:
F000004I77
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
19
LVL A:
LVL B:
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
GF
MOP:
51
CATEG.:
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
JA
ICQ:
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):
LVL B Code (LVL_B):
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 19
Method 50 reusable container.
Method of Preservation (MOP): 51
Watervaporproof bag, sealed.
Cushion Material (CUSH): GF
Mil-prf-26514, type i, class 2, grade b, flexible polyurethane foam, medium load range.
Preservation Material (PRESS MAT): 00
No requirement.