6105-00-243-6575

Description: Alternating Current Motor

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Electrical Motors

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

6105-00-243-6575 Properties

  • NSN:
    6105-00-243-6575
  • Description:
    Alternating Current Motor
  • Shelf Life:
    N/A
  • DEMIL:
    DEMIL/MLI
  • UOM:
    EA
  • Overall Height:
    6.938 inches
  • Overall Length:
    11.281 inches
  • Overall Width:
    9.500 inches
  • Spline Minor Diameter:
    0.520 inches single end and 0.529 inches single end
  • Undercut Diameter:
    0.585 inches single end and 0.591 inches single end
  • Spline Quantity:
    14 single end
  • Shaft Diameter:
    0.616 inches single end and 0.617 inches single end
  • Undercut Length:
    0.039 inches single end and 0.042 inches single end
  • Duty Cycle:
    Continuous
  • Inclosure Feature:
    Spray tight
  • Winding Type:
    Induction-squirrel cage
  • Spline Length:
    1.218 inches single end and 1.278 inches single end
  • Mounting Method:
    Fixed base
  • Mounting Facility Type And Quantity:
    4 unthreaded hole
  • Cooling Method:
    Fan cooled
  • Undercut Center To Shaft End Distance:
    1.237 inches single end and 1.299 inches single end
  • Current Rating Method:
    Load and locked rotor
  • Torque Rating And Type:
    1.5 foot-pounds running and 4.8 foot-pounds starting
  • Inclosure Specificationification:
    Commercial
  • Features Provided:
    Horizontal mounting position
  • Power Rating:
    1.0000 horsepower output
  • Length Of Shaft From Housing:
    1.781 inches single end
  • Shaft Center To Mounting Surface Distance:
    3.594 inches single end
  • Center To Center Distance Between Mounting Facilities Parallel To Length:
    3.000 inches
  • Tempurature Rating:
    50.0 ambient degrees celsius
  • Rotor Speed Rating In Rpm:
    3600.0 single no load and 3450.0 single full load
  • Center To Center Distance Between Mounting Facilities Parallel To Width:
    4.875 inches
  • Connection Type And Voltage Rating In Volts:
    440.0 line to neutral single input
  • Shaft End Characteristic:
    A14 first style single end and a28 second style single end
  • Phase:
    Three input
  • Special Features:
    No lubrication required
  • Frequency In Hertz:
    60.0 input
  • Terminal Type And Quantity:
    3 screw
Manufacturers and Part Numbers
Part Number
Brand
2860041
Navair And Navsea Managed
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N2H4
PICA:
HD
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00530
FIIG:
A271A0
Concept No.:
1
App. Key:
H
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
MMAC:
---
CRITL:
S
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): S
The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
14.0 X 9.0 X 9.0
Pack Weight:
48.2000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
ED
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
03
LVL A:
E
LVL B:
Q
LVL C:
Q
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
NA
MOP:
51
CATEG.:
ZZZZ
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
00
ICQ:
000
THK:
X
TOS:
A
UCL:
O
Packaging Code Definitions
LVL A Code (LVL_A):E
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): M
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special Markings Code (SPC MKG): 03
Method 50.
Method of Preservation (MOP): 51
Watervaporproof bag, sealed.
Cushion Material (CUSH): NA
Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.
Preservation Material (PRESS MAT): 00
No requirement.