5935-00-947-1035

Description: Receptacle Dummy Connector

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: MIL-C-26482

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

More MIL-C-26482 Parts

MIL-C-26482 Receptacle Dummy Connector

Spec. Type Spec. Color Gloss Size
Contact surface treatment document and classification MIL-C-26482

Array Properties

  • NSN:
    Array
  • Description:
    Receptacle Dummy Connector
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Overall Length:
    0.571 inches
  • Overall Height:
    0.954 inches
  • Overall Width:
    0.954 inches
  • Environmental Protection:
    Moisture resistant and vibration resistant and salt water resistant
  • Unthreaded Mounting Hole Diameter:
    0.120 inches
  • Center To Center Distance Between Mounting Facilities Parallel To Height:
    0.719 inches
  • Distance Between Centerlines Of Mounting Facilities Parallel To Body Width:
    0.719 inches
  • Distance From Mounting Shoulder To Front Face:
    Between 0.462 inches and 0.493 inches
  • Mating End Quantity:
    1
  • Polarization Method:
    Keyway or multiple keyway
  • Insert Position In Deg:
    0.0
  • Shell Type:
    Solid
  • Connector Locking Method:
    Bayonet pin
  • End Application:
    Helicopter observation (ahip), oh-58d; aircraft, c-2a (reprocured); aircraft, hawkeye e-2c; f4s aircraft; radar threat emiter an/mst-t1; helicopter, mh-53e; helicopter, advance attack, ah-1w; aircraft, stratolifter c-135; helicopter, carrier based asw, sh-60f
  • Criticality Code Justification:
    Feat
  • Shell Material:
    Aluminum alloy
  • Shell Surface Treatment:
    Cadmium
  • Shell Surface Treatment Specification:
    Qq-p-416, type 2, cl 3 federal specification single treatment response
  • Special Features:
    Weapon system essential
  • Test Data Document:
    81349-mil-c-26482 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Specification Data:
    96906-ms3115 government standard
Manufacturers and Part Numbers
Part Number
Brand
MS3115-10A
Military Standards
MIL-C-26482
Military Specifications
KPT15-10A
Itt Cannon Gmbh
VG95328T07C10
Glenair Italia Spa
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A918
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FXGX
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N9BN
PICA:
GX
DSOR:
User:
AUSTRIA Austria
MOE_CD:
WB
MOE_RL:
WB01
PICA:
WB
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
SINGAPORE Singapore
MOE_CD:
YJ
MOE_RL:
YJ01
PICA:
YJ
DSOR:
User:
MALAYSIA Malaysia
MOE_CD:
YW
MOE_RL:
YW01
PICA:
YW
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
GERMANY Germany
MOE_CD:
ZG
MOE_RL:
ZG01
PICA:
ZG
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
NETHERLANDS Netherlands
MOE_CD:
ZN
MOE_RL:
ZN01
PICA:
ZN
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
User:
DENMARK Denmark
MOE_CD:
ZS
MOE_RL:
ZS01
PICA:
ZS
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15092
FIIG:
A039B0
Concept No.:
App. Key:
P
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
U
ESD:
ESD:
MMAC:
---
CRITL:
Y
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): U
Precious metal content is unknown
Criticality (CRITL): Y
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restrictions or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
A1
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
00
MOP:
10
CATEG.:
60F0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
00
ICQ:
AAA
THK:
0
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 10
Physical protection.
Cushion Material (CUSH): 00
No requirement.
Preservation Material (PRESS MAT): 00
No requirement.