5935-00-926-7522

Description: Electrical Receptacle Connector

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: MIL-M-19833

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

More MIL-M-19833 Parts

MIL-M-19833 Electrical Receptacle Connector

Spec. Type Spec. Color Gloss Size
Shell surface treatment document and classification MIL-M-19833

Array Properties

  • NSN:
    Array
  • Description:
    Electrical Receptacle Connector
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Body Style:
    Straight edge type w/mounting flange
  • Overall Length:
    4.970 inches
  • Overall Height:
    0.453 inches
  • Overall Width:
    Between 0.521 inches and 0.541 inches
  • Environmental Protection:
    Moisture resistant and vibration resistant
  • Unthreaded Mounting Hole Diameter:
    0.128 inches
  • Distance Between Mounting Facility Centers:
    Between 4.685 inches and 4.715 inches
  • Board Accommodated Length:
    2.995 inches single board and 4.445 inches single board
  • Board Accommodated Width:
    Between 0.054 inches and 0.070 inches
  • Mating End Quantity:
    1
  • Contact Position Arrangement Style:
    2 rows of independent contacts inserted board single mating end
  • Contact Removability:
    Removable single mating end single contact grouping
  • Contact Maximum Current Rating In Amps:
    5.0 single mating end single contact grouping
  • Shell Type:
    Solid
  • Terminal Location:
    Front single mating end single contact grouping
  • Contact Material:
    Copper alloy single mating end single contact grouping
  • Contact Surface Treatment:
    Gold single mating end single contact grouping
  • Terminal Type:
    Tab, solder lug single mating end single contact grouping
  • Shell Material:
    Plastic diallyl phthalate
  • Shell Surface Treatment:
    Plastic diallyl phthalate
  • Shell Surface Treatment Specification:
    Mil-m-19833, ty gdi-30f military specification single treatment response
  • Included Contact Quantity:
    41 single mating end single contact grouping
  • Included Contact Type:
    Round socket single mating end single contact grouping
  • Special Features:
    Self-locking and includes one shoulder, 0.365 in. Min and 0.377 in. Max diameter, 0.013 in. Min and 0.019 in. Max height
  • Precious Material And Location:
    Contact surfaces gold
  • Precious Material And Weight:
    0.041 gold grains, troy
  • Precious Material:
    Gold
  • Test Data Document:
    81349-mil-c-21097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Specification Data:
    81349-mil-c-21097/33 government specification
Manufacturers and Part Numbers
Part Number
Brand
00-7024-41-163-1
Elco/dynatech
M21097-04-33
Military Specifications
M21097/4-33
Military Specifications
MILC21097-4
Military Specifications
00-7024-041-163-110
Avx Corporation
1081H02H45
Northrop Grumman Systems Corporation
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
POLAND Poland
MOE_CD:
WP
MOE_RL:
WP01
PICA:
WP
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE_CD:
ZK
MOE_RL:
ZK01
PICA:
ZK
DSOR:
User:
PORTUGAL Portugal
MOE_CD:
ZP
MOE_RL:
ZP01
PICA:
ZP
DSOR:
User:
NORWAY Norway
MOE_CD:
ZT
MOE_RL:
ZT01
PICA:
ZT
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
15093
FIIG:
A039B0
Concept No.:
App. Key:
K
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
G
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): G
Item contains gold.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
D3
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
NA
MOP:
41
CATEG.:
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
00
ICQ:
AAA
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 41
Watervaporproof bag, sealed.
Cushion Material (CUSH): NA
Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.
Preservation Material (PRESS MAT): 00
No requirement.