5930-00-004-6008

Description: Rotary Switch

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Switches

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

5930-00-004-6008 Properties

  • NSN:
    5930-00-004-6008
  • Description:
    Rotary Switch
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Thread Class:
    2a single mounting facility
  • Thread Length:
    0.250 inches single mounting facility
  • Hazardous Locations/environmental Protection:
    Explosion proof
  • Overall Length:
    1.338 inches
  • First Flat Length:
    0.250 inches single actuator
  • Flat Height:
    0.093 inches single actuator
  • Shaft Diameter:
    0.125 inches single actuator
  • Shaft Length:
    0.375 inches single actuator
  • Overall Diameter:
    0.500 inches
  • Individual Section Quantity:
    1
  • Nonturn Device Type:
    Flatted bushing at 3: 00 o'clock
  • Operating Tempurature Range:
    -65.0/+85.0 degrees celsius
  • Switch Contact Basic Design:
    Nonpile-up symmetrical
  • Pole Quantity:
    2 single section rear
  • Throw Quantity:
    3 single section rear
  • Mounting Method:
    Threaded bushing w/panel seal single mounting facility
  • Thread Size:
    0.250 inches single mounting facility
  • Contact Voltage Rating In Volts:
    28.0 dc at sea level
  • Shaft Flat/slot Angular Location:
    198.0 degrees from nonturn device single actuator
  • Switch Actuator Indexing Position Quantity:
    3 single actuator
  • Shaft Type:
    Round, flatted single actuator
  • Terminal Type:
    Tab, solder lug
  • Contact Switching Action:
    Breaks before makes single section rear
  • Switch Actuator Positioning Increment:
    36.0 degrees single actuator
  • Detent Rotational Torque Range:
    +0.500 to 1.500 inch-pounds single actuator
  • Switch Actuator Stop Device Type:
    Fixed stop single actuator
  • Contact Load Current Rating:
    200.0 milliamperes resistive load dc at sea level and 30.0 milliamperes inductive load dc at sea level and 100.0 milliamperes lamp load dc at sea level
  • Style Designator:
    Snap or line
  • Test Data Document:
    81349-mil-s-3786 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Thread Series Designator:
    Unf single mounting facility
  • Specification Data:
    81349-mil-s-3786/20 government specification
Manufacturers and Part Numbers
Part Number
Brand
M3786/20-024
Military Specifications
MIL-DTL-3786/20
Military Specifications
SW618-24
Illinois Tool Works .
50M36-01-2-3N
Grayhill
MIL-S-3786/20
Military Specifications
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A918
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FXGX
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N9BN
PICA:
GX
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
GERMANY Germany
MOE_CD:
ZG
MOE_RL:
ZG01
PICA:
ZG
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
02134
FIIG:
A052B0
Concept No.:
1
App. Key:
A
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
U
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): U
Precious metal content is unknown
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
XX
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
XX
MOP:
ZZ
CATEG.:
69F0
PRESS MAT:
XX
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
XX
ICQ:
XXX
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): ZZ
See j.4.1.B.
Cushion Material (CUSH): XX
Preservation Material (PRESS MAT): XX