- Home /
- NSN Parts Catalog /
- Electrical and Electronic Equipment Components /
- Fuses, Arrestors, Absorbers, and Protectors /
- 5920-01-477-1018
5920-01-477-1018
Extractor Post Fuseholder
- NSN
- 5920-01-477-1018
- NIIN
- 01-477-1018
- Description
- Extractor Post Fuseholder
- DEMIL
- DEMIL/MLI
- INC
- 28909
- Assigment Date
- Mon, Jul 31, 2000
- Schedule B Code
- 8548900100
- Accommodated Ferrule Diameter
- 0.406 inches nominal
- Accommodated Fuse Length
- 1.500 inches nominal
- Body Style
- panel mounted type
- Cap Diameter
- 0.620 inches nominal
- Center To Center Distance Between Outside Mounting Holes Along Length
- 1.940 inches nominal
- Center To Center Distance Between Outside Mounting Holes Along Width
- 1.000 inches nominal
- Current Carrying Rating In Amps
- 30.0
- Environmental Protection
- watertight
- Fuse Accommodation Quantity
- 2
- Fuse Terminal Type Accommodated
- ferrule
- Indicating Lamp Voltage Range In Volts
- +90.0 to 500.0
- Length From Front Protrusion To Mounting Surface
- 1.190 inches nominal
- Lens Color
- clear
- Mounting Hole Diameter
- 0.152 inches nominal
- Mounting Hole Quantity
- 2
- Mounting Hole Height
- 1.840 inches nominal
- Mounting Hole Style
- panel mounting w/2 or 3 holes
- Mounting Hole Width
- 1.560 inches nominal
- Overall Height
- 2.280 inches nominal
- Overall Length
- 2.190 inches nominal
- Overall Width
- 2.060 inches nominal
- Panel Thickness
- 0.187 inches maximum
- Resistor Rating
- 33.000 ohms
- Screw Thread Diameter
- 0.164 inches nominal
- Screw Thread Quantity Per Inch
- 32.0
- Specification/Standard Data
- 81349-mil-prf-19207/23 government specification
- Terminal Type And Quantity
- 4 threaded stud
- Test Data Document
- "81349-mil-prf-19207 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Voltage In Volts
- 33.0
Material and Special Handling
Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.
-
HMICHAZMAT (Hazardous Material)
-
PIndicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
-
PMICPrecious Metals
-
AItem does not contain precious metal.
-
CRITLCriticality Code
-
XThe item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
MILSPEC
| Spec. Type | Spec. | Color | Gloss | Size |
|---|---|---|---|---|
| Test Data Document | MIL-PRF-19207 |
Manufacturers and Part Numbers
| Part Number | Brand |
|---|---|
| FHL34W-002 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
Major Organizational Entities (MOE)
| Entity | MOE Code | MOE Rule | PICA | DSOR |
|---|---|---|---|---|
| Department of the Navy | DN | N9BN | GX |
Packaging and Dimensions
| PICA SICA | Package Size | Package Weight | Part Weight | Part Dimensions |
|---|---|---|---|---|
| P | 0000 X 0000 X 0000 | 0000.3 | . | |
| PICA SICA | Container | OPI | SPI No. | SPI Rev. |
| P | A1 | O | ||
| PICA SICA | SPC Mkg. | LVL A | LVL B | LVL C |
| P | 00 | Q | Q | |
| PICA SICA | CUSH | MOP | CATEG. | PRESS MAT |
| P | 00 | 10 | 60F0 | 00 |
| PICA SICA | WRAP MAT | ICQ | THK | TOS |
| P | 00 | AAA | 0 | B |
- LVL_A: Q
- Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
- LVL_B: Q
- Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
- OPI: O
- Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
- SPC_MKG: 00
- No special marking.
- MOP: 10
- Physical protection.
- CUSH_DUN: 00
- No requirement.
- PRES_MAT: 00
- No requirement.
-
Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
-
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
-
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)
Diode Semiconductor Device
Resistor,variable,wire Wound,pre
Rim Clamp
Circuit Card Assembly
Resistor,variable,wire Wound,pre
- ISO9001 / AS9100
- On-Time Delivery Record
- Counterfeit Parts Prevention System
- ASA (Aviation Suppliers Association) Member