5920-00-948-5765

Description: Extractor Post Fuseholder

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Protectors Absorbers Arrestors Fuses

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

5920-00-948-5765 Properties

  • NSN:
    5920-00-948-5765
  • Description:
    Extractor Post Fuseholder
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Body Material:
    Plastic, polyester, mil-m-14, type mai-60
  • Body Style:
    Panel mounted type
  • Overall Length:
    Between 8.990 inches and 9.010 inches
  • Mounting Hole Diameter:
    Between 0.279 inches and 0.283 inches
  • Mounting Hole Quantity:
    3
  • Overall Diameter:
    Between 2.980 inches and 3.020 inches
  • Panel Thickness:
    0.250 inches
  • Environmental Protection:
    Dripproof
  • Mounting Hole Style:
    Bushing mounting w/3 holes
  • Contact Material:
    Any acceptable
  • Contact Surface Treatment:
    Silver plated, qq-s-365
  • Interruption Indicator Method:
    Neon lamp
  • Shortest Center To Center Distance Between Mounting Holes Along Length:
    Between 0.964 inches and 0.974 inches
  • Fuse Accommodation Quantity:
    1
  • Accommodated Fuse Length:
    1.000 inches
  • Accommodated Fuse Width:
    Between 0.715 inches and 0.785 inches
  • Accommodated Fuse Thickness:
    Between 0.122 inches and 0.128 inches
  • Resistor Rating:
    160.0 kilohms and 160.0 kilohms
  • Indicating Lamp Voltage Range In Volts:
    +90.0/+500.0 and +90.0/+500.0
  • Length From Front Protrusion To Mounting Surface:
    Between 1.870 inches and 1.880 inches
  • Cap Diameter:
    Between 2.480 inches and 2.520 inches
  • Center To Center Distance Between Outside Mounting Holes Along Length:
    Between 1.928 inches and 1.948 inches
  • Center To Center Distance Between Outside Mounting Holes Along Width:
    Between 2.350 inches and 2.400 inches
  • Center To Center Distance Between Inside Mounting Holes Along Length:
    Between 0.964 inches and 0.974 inches
  • Bushing Hole Diameter:
    Between 2.182 inches and 2.192 inches
  • Center To Center Distance Between Bushing Hole And Mounting Hole:
    Between 1.370 inches and 1.380 inches
  • Screw Thread Diameter:
    0.312 inches
  • Screw Thready Qty Per Inch (tpi):
    18.0
  • Current Carrying Rating In Amps:
    1000.0
  • Fuse Terminal Type Accommodated:
    Knife blade
  • Voltage In Volts:
    500.0
  • Precious Material And Location:
    Contact surfaces silver
  • Precious Material:
    Silver
  • Test Data Document:
    81349-mil-f-19207 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    2 threaded stud
  • Specification Data:
    81349-mil-f-19207/6 government specification
Manufacturers and Part Numbers
Part Number
Brand
FHL15G-001
Military Specifications
MIL-PRF-19207/6
Military Specifications
MILF19207-6
Military Specifications
FHL15G
Military Specifications
FAL15G-001
Military Specifications
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FXGX
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N9BN
PICA:
GX
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
UNITED KINGDOM United Kingdom
MOE_CD:
ZK
MOE_RL:
ZK01
PICA:
ZK
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
28909
FIIG:
A014A0
Concept No.:
1
App. Key:
B
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
S
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): S
Item contains silver.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
2.0000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
EC
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
NA
MOP:
41
CATEG.:
69F0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
00
ICQ:
AAA
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 41
Watervaporproof bag, sealed.
Cushion Material (CUSH): NA
Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.
Preservation Material (PRESS MAT): 00
No requirement.