5920-00-900-0209

Description: Extractor Post Fuseholder

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Protectors Absorbers Arrestors Fuses

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

5920-00-900-0209 Properties

  • NSN:
    5920-00-900-0209
  • Description:
    Extractor Post Fuseholder
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Body Material:
    Plastic, diallyl phthalate, mil-m-14, type sdg
  • Body Style:
    Panel mounted type
  • Terminal Material:
    Brass
  • Overall Length:
    Between 2.360 inches and 2.400 inches
  • Overall Height:
    Between 2.170 inches and 2.210 inches
  • Overall Width:
    Between 1.040 inches and 1.080 inches
  • Mounting Hole Diameter:
    Between 0.147 inches and 0.157 inches
  • Mounting Hole Quantity:
    4
  • Environmental Protection:
    Watertight and body sealed
  • Mounting Hole Style:
    3 bushing mounting w/4 holes
  • Contact Material:
    Copper
  • Contact Surface Treatment:
    Silver plated, qq-s-365
  • Fuse Accommodation Quantity:
    3
  • Accommodated Fuse Length:
    1.250 inches
  • Accommodated Ferrule Diameter:
    0.250 inches
  • Length From Front Protrusion To Mounting Surface:
    Between 0.540 inches and 0.580 inches
  • Cap Diameter:
    Between 0.600 inches and 0.640 inches
  • Center To Center Distance Between Outside Mounting Holes Along Length:
    Between 0.745 inches and 0.755 inches
  • Center To Center Distance Between Outside Mounting Holes Along Width:
    Between 0.495 inches and 0.505 inches
  • Bushing Hole Diameter:
    Between 0.583 inches and 0.598 inches
  • Center To Center Distance Between Bushing Holes:
    Between 0.745 inches and 0.757 inches
  • Err Default:
    Err default and err default
  • Screw Thread Diameter:
    0.138 inches
  • Screw Thready Qty Per Inch (tpi):
    32.0
  • Current Carrying Rating In Amps:
    30.0
  • Fuse Terminal Type Accommodated:
    Ferrule
  • Voltage In Volts:
    250.0
  • Precious Material And Location:
    Contact surfaces silver
  • Precious Material:
    Silver
  • Test Data Document:
    81349-mil-f-19207 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    3 threaded stud and 3 screw
  • Specification Data:
    81349-mil-f-19207/30 government specification
Manufacturers and Part Numbers
Part Number
Brand
FHN46WB
Cooper Bussmann
MIL-PRF-19207/30
Military Specifications
303
Fic Corporation
MIL-F-19207/30
Military Specifications
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A918
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FXGX
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N9BN
PICA:
GX
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
KUWAIT Kuwait
MOE_CD:
YK
MOE_RL:
YK01
PICA:
YK
DSOR:
User:
MALAYSIA Malaysia
MOE_CD:
YW
MOE_RL:
YW01
PICA:
YW
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
28909
FIIG:
A014A0
Concept No.:
1
App. Key:
B
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
P
PMIC:
S
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): P
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Precious Metals (PMIC): S
Item contains silver.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
0.2000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
D3
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
XX
MOP:
31
CATEG.:
84Z0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
00
ICQ:
AAA
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 31
Waterproof bag, sealed.
Cushion Material (CUSH): XX
Preservation Material (PRESS MAT): 00
No requirement.