Home /
NSN Parts Catalog /
Electrical and Electronic Equipment Components /
Capacitors /
5910-01-498-9277

5910-01-498-9277

Ceramic Dielectr Fixed Capacitor

NSN: 5910-01-498-9277
FSG: 59 - Electrical and Electronic Equipment Components
FSC: 5910 -Capacitors
NIIN: 01-498-9277
Description: Ceramic Dielectr Fixed Capacitor
DEMIL: DEMIL/MLI
INC: 00007
Assigment Date: Mon, Jul 8, 2002
Schedule B Code: 8532290040
Body Height: 1.500 millimeters maximum
Body Length: 4.500 millimeters nominal
Body Style: chip type
Body Width: 6.400 millimeters nominal
Capacitance Value Per Section: 12000.000 picofarads single section
Dissipation Factor At Reference Temp In Percent: 0.150
Insulation Resistance At Maximum Operating Temp: 1000.0 megohms
Insulation Resistance At Reference Temp: 100000.0 megohms
Nonderated Operating Temp: -55.0 celsius minimum and 125.0 celsius maximum
Nonderated Continuous Voltage Rating And Type Per Section: 50.0 dc single section
Reliability Failure Rate Level In Percent: 0.010
Reliability Indicator: established
Schematic Diagram Designator: no common or grounded electrode(s)
Specification/Standard Data: 81349-mil-prf-55681/11b government specification
Terminal Surface Treatment: solder
Terminal Type And Quantity: 2 bonding pad
Test Data Document: "81349-mil-prf-55681e specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius: -30.0 to 30.0 single section
Tolerance Range Per Section: -10.00 to 10.00 percent single section

Material and Special Handling

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC HAZMAT (Hazardous Material): P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC Precious Metals: A

Item does not contain precious metal.
CRITL Criticality Code: X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

MILSPEC

Spec. Type	Spec.	Color	Gloss	Size
Test Data Document	MIL-PRF-55681E

Manufacturers and Part Numbers

Part Number	Brand
CDR35BP123AKUR	Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-PRF-55681/11B	Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Major Organizational Entities (MOE)

Entity	MOE Code	MOE Rule	PICA	DSOR
Department of the Navy	DN	N9BN	GX

Packaging and Dimensions

PICA SICA	Package Size	Package Weight	Part Weight	Part Dimensions
P	0000 X 0000 X 0000	0000.0	.
PICA SICA	Container	OPI	SPI No.	SPI Rev.
P	D3	M
PICA SICA	SPC Mkg.	LVL A	LVL B	LVL C
P	ZZ	Q	Q
PICA SICA	CUSH	MOP	CATEG.	PRESS MAT
P	00	41	69Z0	00
PICA SICA	WRAP MAT	ICQ	THK	TOS
P	00	AAA	0	A

Packaging Code Definitions

LVL_A: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL_B: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
OPI: M: All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
SPC_MKG: ZZ: Special requirements.
MOP: 41: Watervaporproof bag, sealed.
CUSH_DUN: 00: No requirement.
PRES_MAT: 00: No requirement.

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)