Home /
NSN Parts Catalog /
Electrical and Electronic Equipment Components /
Resistor /
5905-01-495-9783

5905-01-495-9783

Resistor,variable,nonwire Wound,

NSN: 5905-01-495-9783
FSG: 59 - Electrical and Electronic Equipment Components
FSC: 5905 -Resistor
NIIN: 01-495-9783
Description: Resistor,variable,nonwire Wound,
DEMIL: DEMIL/MLI
INC: 37405
Assigment Date: Thu, Mar 28, 2002
Schedule B Code: 8533400080
Actuator Travel Control Feature: clutch
Actuator Type: single shaft
Ambient Temp In Deg Celsius Per Section At Full Rated Power: 70.0 single section
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power: 150.0 single section
Body Diameter: 0.500 inches nominal
Body Length: 0.453 inches nominal
Body Style: cylindrical bushing mounted
Contact Arm Electrical Off Position: fully ccw
Effective Electrical Rotation In Deg Angular Rotation: 292.0 minimum and 296.0 maximum
Electrical Resistance Per Section: 5.0 kilohms single section
Features Provided: humidity proof
Fragility Factor: moderately rugged
Maximum Running Torque: 0.50 inch-ounces
Maximum Starting Torque: 6.00 inch-ounces
Maximum Stop Torque: 3.00 inch-ounces
Mounting Bushing Length: 0.250 inches nominal
Mounting Method: standard bushing
Power Dissipation Rating Per Section In Watts: 0.5 free air single section
Reliability Indicator: not established
Resistance Tolerance Per Section In Percent: -10.0 to 10.0 single section
Rotary Actuator Travel In Angular Deg: 292.0 minimum and 298.0 maximum
Screw Thread Diameter: 0.250 inches nominal
Screw Thread Quantity Per Inch: 32.0
Screw Thread Series Designator: unef
Section Quantity: 1
Shaft Bearing Type: bearing
Shaft Diameter: 0.125 inches nominal
Shaft Style: round, slotted
Shaft Length: 0.875 inches nominal
Specification/Standard Data: 81349-mil-prf-94/3 government specification
Terminal Location: rear end
Terminal Type And Quantity: 3 tab, solder lug
Test Data Document: "81349-mil-prf-94 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Material and Special Handling

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC HAZMAT (Hazardous Material): N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC Precious Metals: A

Item does not contain precious metal.
CRITL Criticality Code: X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

MILSPEC

Spec. Type	Spec.	Color	Gloss	Size
Test Data Document	MIL-PRF-94

Manufacturers and Part Numbers

Part Number	Brand
RV6SAYFD502C	Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Major Organizational Entities (MOE)

Entity	MOE Code	MOE Rule	PICA	DSOR
Department of the Navy	DN	N9BN	GX

Packaging and Dimensions

PICA SICA	Package Size	Package Weight	Part Weight	Part Dimensions
P	X X	0000.0	.
PICA SICA	Container	OPI	SPI No.	SPI Rev.
P	BS	M
PICA SICA	SPC Mkg.	LVL A	LVL B	LVL C
P	ZZ	Q	Q
PICA SICA	CUSH	MOP	CATEG.	PRESS MAT
P	00	41		00
PICA SICA	WRAP MAT	ICQ	THK	TOS
P	EA	AAA	0	A

Packaging Code Definitions

LVL_A: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL_B: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
OPI: M: All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
SPC_MKG: ZZ: Special requirements.
MOP: 41: Watervaporproof bag, sealed.
CUSH_DUN: 00: No requirement.
PRES_MAT: 00: No requirement.

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)