Home /
NSN Parts Catalog /
Electrical and Electronic Equipment Components /
Resistor /
5905-01-457-9072

5905-01-457-9072

Resistor,variable,nonwire Wound,

NSN: 5905-01-457-9072
FSG: 59 - Electrical and Electronic Equipment Components
FSC: 5905 -Resistor
NIIN: 01-457-9072
Description: Resistor,variable,nonwire Wound,
DEMIL: DEMIL/MLI
INC: 37405
Assigment Date: Thu, Aug 6, 1998
Schedule B Code: 8533400080
Actuator Type: single shaft
Ambient Temp In Deg Celsius Per Section At Full Rated Power: 85.0 single section
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power: 150.0 single section
Body Height: 0.250 inches nominal
Body Length: 0.250 inches maximum
Body Width: 0.165 inches nominal
Body Style: rectangular
Center To Center Distance Between Center Terminal And Outside Terminal: 0.100 inches nominal
Center To Center Distance Between Terminals: 0.200 inches nominal
Center To Center Distance Between Terminal Rows: 0.100 inches nominal
Contact Arm Electrical Off Position: fully ccw
Electrical Resistance Per Section: -50.0 kilohms single section
Features Provided: nonmetallic shaft
Maximum Running Torque: 5.00 inch-ounces
Mounting Method: terminal
Power Dissipation Rating Per Section In Watts: 0.25 free air single section
Reliability Failure Rate Level In Percent: 0.010
Reliability Indicator: established
Resistance Tolerance Per Section In Percent: -10.0 to 10.0 single section
Section Quantity: 1
Shaft Bearing Type: roller
Shaft Diameter: 0.075 inches nominal
Shaft Style: round, slotted
Shaft Length: 0.050 inches maximum
Specification/Standard Data: 81349-mil-prf-39035/3 government specification
Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius: -250.0 to 250.0 single section
Terminal Location: lower adjacent side two rows
Terminal Length: 0.172 inches minimum
Terminal Type And Quantity: 3 pin
Test Data Document: "81349-mil-prf-39035 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Material and Special Handling

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC HAZMAT (Hazardous Material): N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC Precious Metals: A

Item does not contain precious metal.
CRITL Criticality Code: X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

MILSPEC

Spec. Type	Spec.	Color	Gloss	Size
Test Data Document	MIL-PRF-39035

Manufacturers and Part Numbers

Part Number	Brand
RJR26CX503R	Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Major Organizational Entities (MOE)

Entity	MOE Code	MOE Rule	PICA	DSOR
Department of the Army	DA	A918	GX

Packaging and Dimensions

PICA SICA	Package Size	Package Weight	Part Weight	Part Dimensions
P	0000 X 0000 X 0000	0000.0	.
PICA SICA	Container	OPI	SPI No.	SPI Rev.
P	ZZ	M
PICA SICA	SPC Mkg.	LVL A	LVL B	LVL C
P	ZZ	Q	Q
PICA SICA	CUSH	MOP	CATEG.	PRESS MAT
P	ZZ	ZZ	69F0	ZZ
PICA SICA	WRAP MAT	ICQ	THK	TOS
P	ZZ	AAA	C	A

Packaging Code Definitions

LVL_A: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL_B: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
OPI: M: All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
SPC_MKG: ZZ: Special requirements.
MOP: ZZ: See j.4.1.b.
CUSH_DUN: ZZ: Special requirements. See specific instructions or drawings provided.
PRES_MAT: ZZ: Special requirement. See specific instructions or drawings provided.

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)