5905-00-097-7552

Description: Nonwire Wound Variable Resistor

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Resistors

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

5905-00-097-7552 Properties

  • NSN:
    5905-00-097-7552
  • Description:
    Nonwire Wound Variable Resistor
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Section Quantity:
    1
  • Body Style:
    Rectangular w/mounting holes/slots
  • Reliability Indicator:
    Not established
  • Overall Length:
    Between 1.300 inches and 1.340 inches
  • Terminal Length:
    Between 0.469 inches and 0.531 inches
  • Overall Height:
    Between 0.769 inches and 0.861 inches
  • Overall Width:
    Between 0.180 inches and 0.200 inches
  • Mounting Hole Diameter:
    0.093 inches
  • Shaft Diameter:
    Between 0.100 inches and 0.130 inches
  • Shaft Length:
    Between 0.060 inches and 0.080 inches
  • Body Length:
    Between 1.240 inches and 1.260 inches
  • Body Width:
    Between 0.180 inches and 0.200 inches
  • Body Height:
    Between 0.300 inches and 0.330 inches
  • Shaft Style:
    Round, slotted
  • Actuator Type:
    Single shaft
  • Maximum Starting Torque:
    8.00 inch-ounces
  • Center To Center Distance Between Terminals:
    Between 0.890 inches and 0.910 inches
  • Lateral Distance Between Mounting Hole Centers:
    Between 0.890 inches and 0.910 inches
  • Terminal Location:
    Rear-bottom
  • Mounting Method:
    Terminal
  • Features Provided:
    Nonmetallic shaft
  • Electrical Resistance Per Section:
    10.0 kilohms single section
  • Center To Center Distance Between Center Terminal And Outside Terminal:
    Between 0.190 inches and 0.310 inches
  • Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
    150.0 single section
  • Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
    -250.0/+250.0 single section
  • Power Dissipation Rating Per Section In Watts:
    0.75 free air single section
  • Resistance Tolerance Per Section In Percent:
    -10.0/+10.0 single section
  • Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
    85.0 single section
  • Test Data Document:
    81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Terminal Type And Quantity:
    3 pin
  • Specification Data:
    81349-mil-r-22097/2 government specification
Manufacturers and Part Numbers
Part Number
Brand
RJ12CP103
Military Specifications
MILR22097-2
Military Specifications
869002-0001
Thales Defense & Security
418283-28
Raytheon Company
41050120-000
Dne Technologies
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
AUSTRIA Austria
MOE_CD:
WB
MOE_RL:
WB01
PICA:
WB
DSOR:
User:
POLAND Poland
MOE_CD:
WP
MOE_RL:
WP01
PICA:
WP
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
ISRAEL Israel
MOE_CD:
YD
MOE_RL:
YD01
PICA:
YD
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
NETHERLANDS Netherlands
MOE_CD:
ZN
MOE_RL:
ZN01
PICA:
ZN
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
37405
FIIG:
A002A0
Concept No.:
1
App. Key:
B
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
U
ESD:
B
ESD:
B
MMAC:
---
CRITL:
X
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): U
Precious metal content is unknown
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
0.1000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
XX
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
ZZ
LVL A:
Q
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
00
MOP:
41
CATEG.:
69F0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
FA
ICQ:
AAA
THK:
0
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): ZZ
Special requirements.
Method of Preservation (MOP): 41
Watervaporproof bag, sealed.
Cushion Material (CUSH): 00
No requirement.
Preservation Material (PRESS MAT): 00
No requirement.