5340-00-839-9499

Description: Angle Bracket

Price Quote

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
International Shipping Available
Friendly service to back every order

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

More MIL-S-18729 Parts

1560-00-478-4169 Air Structural Component Bracket
MIL-S-18729 Bracket
5310-00-596-9485 Flat Washer
MIL-S-18729 Washer
5310-01-146-9911 Recessed Washer
MIL-S-18729 Washer
5310-01-088-6097 Lock Washer
MIL-S-18729 Washer
5310-00-424-6831 Flat Washer
MIL-S-18729 Washer
5310-00-674-0351 Flat Washer
MIL-S-18729 Washer
5310-00-281-3492 Flat Washer
MIL-S-18729 Washer
5310-01-434-3796 Flat Washer
MIL-S-18729 Washer

MIL-S-18729 Angle Bracket

Spec. Type	Spec.	Color	Gloss	Size
Material document and classification	MIL-S-18729

Array Properties

NSN:

Array
Description:

Angle Bracket
Shelf Life:

N/A
DEMIL:

NO
UOM:

1 EA

First Leg Length:

Between 0.615 inches and 0.635 inches
Second Leg Length:

Between 0.990 inches and 1.010 inches
Reinforcement Method (non-core):

Beaded both sides
Second Leg Width:

Between 0.490 inches and 0.510 inches
First Leg Hole Diameter:

Between 0.194 inches and 0.214 inches
Second Leg Hole Diameter:

Between 0.118 inches and 0.138 inches
Second Leg Distance Between Hole Centers Along Length:

0.365 mils and 0.385 centimeters
Second Leg Distance From Edge To Hole Center Along Width:

Between 0.240 inches and 0.260 inches
Second Leg Distance From Edge To Hole Center Along Length:

Between 0.240 inches and 0.260 inches
First Leg Thickness:

Between 0.053 inches and 0.073 inches
Second Leg Thickness:

Between 0.053 inches and 0.073 inches
First Leg Width:

Between 0.490 inches and 0.510 inches
First Leg Distance From Edge To Hole Center Along Width:

Between 0.240 inches and 0.260 inches
First Leg Distance From Edge To Hole Center Along Length:

Between 0.240 inches and 0.260 inches
First Leg End Radius:

Between 0.240 inches and 0.260 inches
Second Leg End Radius:

Between 0.240 inches and 0.260 inches
First Leg Style:

End radius
First Leg Hole Arrangement Style:

One hole
Second Leg Style:

End radius
Second Leg Hole Arrangement Style:

Two holes
Second Leg Relationship To First Leg:

Not identical
First Leg Angle:

90.0 degrees
Material:

Steel comp 4130
Material Specification:

Mil-s-18729, cond n military specification single material response
Surface Treatment:

Cadmium and chromate
Surface Treatment Specification:

Qq-p-416, type 2, cl3 federal specification all treatment responses
Style Designator:

Angle

Manufacturers and Part Numbers

Part Number

Brand

AN743BP13

Aeronautical Standards Group

Major Organizational Entities (MOE)

Entity

MOE Code

MOE Rule

PICA

DSOR

User:

Dept. of the Air Force

MOE_CD:

MOE_RL:

FXGI

PICA:

DSOR:

User:

Dept. of the Navy

MOE_CD:

MOE_RL:

N9BZ

PICA:

DSOR:

User:

Spain

MOE_CD:

MOE_RL:

YB01

PICA:

DSOR:

User:

Singapore

MOE_CD:

MOE_RL:

YJ01

PICA:

DSOR:

User:

Germany

MOE_CD:

MOE_RL:

ZG01

PICA:

DSOR:

Part Identification

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

16900

FIIG:

A042A0

Concept No.:

App. Key:

Cond. Code:

Status:

Material and Special Handling

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators

HMIC

PMIC

ESD/EMI

ENAC

MMAC

CRITL

HMIC:

PMIC:

ESD:

MMAC:

---

CRITL:

Hazmat (HMIC): P

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Precious Metals (PMIC): U

Precious metal content is unknown

Criticality (CRITL): X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Packaging and Dimensions

Package Size

Package Weight

Part Weight

Part Dimensions (approx.)

Pack Size:

Pack Weight:

0.2000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg.

LVL A

LVL B

LVL C

SPC Mkg.:

LVL A:

LVL B:

LVL C:

CUSH

MOP

CATEG.

PRESS MAT

CUSH:

MOP:

CATEG.:

PRESS MAT:

WRAP MAT

ICQ

THK

TOS

UCL

WRAP MAT:

ICQ:

000

THK:

TOS:

UCL:

Packaging Code Definitions

LVL A Code (LVL_A):E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B): Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI): M

All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.

Special Markings Code (SPC MKG): 00

No special marking.

Method of Preservation (MOP): 10

Physical protection.

Cushion Material (CUSH): XX

Preservation Material (PRESS MAT): 00

No requirement.