5310-01-145-7533

Flat Washer

NSN: 5310-01-145-7533
FSG: 53 - Hardware and Abrasives
FSC: 5310 -Nuts and Washers
NIIN: 01-145-7533
Description: Flat Washer
DEMIL: DEMIL/MLI
INC: 13393
Assigment Date: Tue, Jan 18, 1983
Schedule B Code: 4016930000
Center Hole Shape Style: round
Cross-Sectional Shape Style: rectangular
Hole Diameter: 0.250 inches minimum and 0.260 inches maximum
Material Document And Classification: mil-r-6865 class 2 type b gr50 mil spec single material response overall
Material: rubber synthetic overall
Part Name Assigned By Controlling Agency: navy special project
Peripheral Shape Style: round
Overall Diameter: 0.750 inches nominal
Thickness: 0.030 inches nominal

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC HAZMAT (Hazardous Material): N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC Precious Metals: A

Item does not contain precious metal.
CRITL Criticality Code: X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Spec. Type	Spec.	Color	Gloss	Size
Material Document and Classification	MIL-R-6865

Part Number	Brand
95387-3	Northrop Grumman Systems Corporation Dba Aerospace Systems Div Aeronautics Systems

Entity	MOE Code	MOE Rule	PICA	DSOR
Department of the Navy	DN	N9BZ	GX

PICA SICA	Package Size	Package Weight	Part Weight	Part Dimensions
P	X X	0000.0	.
PICA SICA	Container	OPI	SPI No.	SPI Rev.
P	10	O
PICA SICA	SPC Mkg.	LVL A	LVL B	LVL C
P	00	E
PICA SICA	CUSH	MOP	CATEG.	PRESS MAT
P	00	10		00
PICA SICA	WRAP MAT	ICQ	THK	TOS
P	00	AAA	0

Packaging Code Definitions

LVL_A: E: Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
OPI: O: Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
SPC_MKG: 00: No special marking.
MOP: 10: Physical protection.
CUSH_DUN: 00: No requirement.
PRES_MAT: 00: No requirement.

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)