4720-01-507-2104

Description: Nonmetallic Hose Assembly

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: MIL-F-27272

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

More MIL-F-27272 Parts

MIL-F-27272 Nonmetallic Hose Assembly

Spec. Type Spec. Color Gloss Size
First end fitting spec/std data MIL-F-27272

Array Properties

  • NSN:
    Array
  • Description:
    Nonmetallic Hose Assembly
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    --
  • Cross Sectional Shape:
    Round
  • Thread Class:
    3a 1st end
  • Thread Direction:
    Right-hand 1st end
  • Inside Diameter:
    Between 0.173 inches and 0.203 inches
  • Tempurature Rating:
    450.0 degrees fahrenheit single response
  • Outside Diameter:
    Between 0.304 inches and 0.343 inches
  • Minimum Inside Bending Radius:
    2.000 inches
  • Hose Or Tubing Specification/std Data:
    Mil-h-27267 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • First End Fitting Specification/std Data:
    Mil-f-27272 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Second End Fitting Specification/std Data:
    Mil-f-27272 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Connection Style:
    Swivel nut flare 2nd end
  • End Connection Design:
    Straight 1st end
  • End Fitting Component And Material:
    Complete fitting stainless steel all ends
  • Fitting Component And Surface Treatment:
    Complete fitting passivate 1st end
  • Connection Type:
    Threaded internal tube 1st end
  • Thready Qty Per Inch (tpi):
    24 2nd end
  • Second End Relationship With First End:
    Not identical
  • Burst Test Pressure:
    7000.0 pounds per square inch
  • First End Swivel Action Capability:
    Included
  • Layer Composition And Location:
    Outer layer braided corrosion resistant steel wire
  • Maximum Operating Pressure:
    1500.0 pounds per square inch
  • Thread Size:
    0.375 inches 1st end
  • Seat Angle:
    37.0 degrees 2nd end
  • Flow Angle:
    90.0 degrees 2nd end
  • Inside Surface Condition:
    Smooth
  • Measuring Method And Length:
    31.875 inches working
  • Second End Swivel Action Capability:
    Included
  • Inside Diameter Hose Accommodated:
    0.3115 inches 1st end
  • Outside Diameter Tube Accommodated:
    0.3235 inches 2nd end
  • Part Name Assigned By Controlling Agency:
    Hose assembly permanently attached fittings, tetrafluoroethylene high temperature medium pressure, flare to flare
  • Special Features:
    Inner conveying tube material-plastic, tetrafluoroethylene
  • Media For Which Designed:
    Hydraulic fluid single response
  • Test Data Document:
    96906-ms8005 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And b81349-mil-h-27267 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And b81349-mil-f-27272 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
  • Thread Series Designator:
    Unjf 1st end
  • Specification Data:
    96906-ms8005 government standard
Manufacturers and Part Numbers
Part Number
Brand
MS8005B317C
Military Standards
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
20311
FIIG:
A542A0
Concept No.:
App. Key:
Cond. Code:
2
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
A
ESD:
A
MMAC:
---
CRITL:
X
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
OPI:
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
LVL A:
LVL B:
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
MOP:
CATEG.:
PRESS MAT:
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
ICQ:
THK:
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):
LVL B Code (LVL_B):
Procedure Indicator Code (OPI):
Special Markings Code (SPC MKG):
Method of Preservation (MOP):
Cushion Material (CUSH):
Preservation Material (PRESS MAT):