3110-00-863-1195

Description: Annular Ball Bearing

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Unmounted Antifriction Bearings

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

3110-00-863-1195 Properties

  • NSN:
    3110-00-863-1195
  • Description:
    Annular Ball Bearing
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Overall Width:
    0.3543 inches
  • Bore Diameter:
    0.9843 inches
  • Overall Outside Diameter:
    1.6535 inches
  • Surface Finish:
    Ground
  • Retainer Fabrication Method:
    Machined
  • Load Direction:
    Radial
  • Bore Shape:
    Straight
  • Internal Clearance:
    0.0040 inches axial and 0.0060 inches axial and 0.0003 inches radial and 0.0009 inches radial
  • Features Provided:
    Aligning ring
  • Standard Tolerance Designation:
    Abec no.3
  • Special Features:
    Ufaces of inner ring sq w/bore within 0.0004 in., faces of outer ring sqw/od within 0.0004 in., parallelism ofouter and inner ring sides 0.0004 in., od concentric w/bore within 0.002 to 0.005 in., heat stabilized for operation at m65 degrees f to p350 degrees f, bore surface 16 to 20 uin aa, od surface 15 to 16 uin aa, inner and outer ring raceway surfaces 6 to 8 uin aa, retainer pocket surface 30 to 63 uin aa, lips of inner ring surface 10 to 20 uin aa, ring and ball rockwell harden c58.0 to c62.0
  • Material:
    Steel outer ring
  • Material Specification:
    Ams 6441 81343 assn standard single material response inner ring
  • Style Designator:
    Non-loading groove, non-separable
  • Test Data Document:
    E1004-91547 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And +6903-91547 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Manufacturers and Part Numbers
Part Number
Brand
2-300-031
Honeywell International .
RM9305KMBRE8682
Timken Company
D3-50141
Skf Usa .
HKB005-158
Mpb Corporation
2-300-031-01
Honeywell International .
2-300-031-02
Honeywell International .
2-300-031-03
Honeywell International .
2-300-031-01L
Honeywell International .
1905S305
Skf Usa .
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A919
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FGGG
PICA:
GX
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
SINGAPORE Singapore
MOE_CD:
YJ
MOE_RL:
YJ01
PICA:
YJ
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00014
FIIG:
A044A0
Concept No.:
App. Key:
C
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
MMAC:
---
CRITL:
F
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): F
The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
2.5 X 2.5 X 1.2
Pack Weight:
0.2000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
XX
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
51
LVL A:
E
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
XX
MOP:
ZZ
CATEG.:
27AZ
PRESS MAT:
XX
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
XX
ICQ:
XXX
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):E
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): M
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special Markings Code (SPC MKG): 51
Method of Preservation (MOP): ZZ
See j.4.1.B.
Cushion Material (CUSH): XX
Preservation Material (PRESS MAT): XX