3110-00-847-2722

Description: Stack Ball Bearing

Price Quote

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
International Shipping Available
Friendly service to back every order

MILSPEC: Unmounted Antifriction Bearings

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

3110-00-847-2722 Properties

NSN:

3110-00-847-2722
Description:

Stack Ball Bearing
Shelf Life:

N/A
DEMIL:

NO
UOM:

1 EA

Overall Width:

Between 3.0409 inches and 3.0709 inches
Bore Diameter:

Between 3.1493 inches and 3.1496 inches
Overall Outside Diameter:

Between 5.5114 inches and 5.5118 inches
Stack Arrangement:

3 angular contact bearings, 2 tandem mtd, 1 reversed
Special Features:

Serial no. Marked on thrust surface of ea bearing, 2 slots 180 degrees apart on thrust faces of outer rings, angular relation to (v) etch, assy marking (v) etched on od of outer ringstabilized for operation at m 65 to p 300 degrees f
Material:

Steel comp e52100 outer ring
Material Specification:

Fed-std-66 federal standard single material response outer ring
Style Designator:

Stack
Test Data Document:

38433-aqcp-2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38433-aqcp-9a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-a47168a1 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-a47163a7 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

Manufacturers and Part Numbers

Part Number

Brand

204-040-346-3

Bell Helicopter Textron .

7216D5T7216D5S

Skf Usa .

458804

Skf Usa .

204-040-346-003

Bell Helicopter Textron .

Major Organizational Entities (MOE)

Entity

MOE Code

MOE Rule

PICA

DSOR

User:

Dept. of the Army

MOE_CD:

MOE_RL:

A919

PICA:

DSOR:

User:

Dept. of the Air Force

MOE_CD:

MOE_RL:

FGGG

PICA:

DSOR:

User:

Austria

MOE_CD:

MOE_RL:

WB01

PICA:

DSOR:

User:

Brazil

MOE_CD:

MOE_RL:

YA01

PICA:

DSOR:

User:

Spain

MOE_CD:

MOE_RL:

YB01

PICA:

DSOR:

User:

New Zealand

MOE_CD:

MOE_RL:

ZE01

PICA:

DSOR:

User:

Republic of Korea

MOE_CD:

MOE_RL:

ZH01

PICA:

DSOR:

User:

Italy

MOE_CD:

MOE_RL:

ZR01

PICA:

DSOR:

User:

Greece

MOE_CD:

MOE_RL:

ZU01

PICA:

DSOR:

User:

Turkey

MOE_CD:

MOE_RL:

ZW01

PICA:

DSOR:

Part Identification

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

30214

FIIG:

A044A0

Concept No.:

App. Key:

Cond. Code:

Status:

Material and Special Handling

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators

HMIC

PMIC

ESD/EMI

ENAC

MMAC

CRITL

HMIC:

PMIC:

ESD:

MMAC:

---

CRITL:

Hazmat (HMIC): N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC): A

Item does not contain precious metal.

Criticality (CRITL): F

The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).

Packaging and Dimensions

Package Size

Package Weight

Part Weight

Part Dimensions (approx.)

Pack Size:

Pack Weight:

12.2000lbs

Item Weight:

Item Dim:

Container

OPI

SPI No.

SPI Rev.

Container:

OPI:

SPI No.:

SPI Rev.:

SPC Mkg.

LVL A

LVL B

LVL C

SPC Mkg.:

LVL A:

LVL B:

LVL C:

CUSH

MOP

CATEG.

PRESS MAT

CUSH:

MOP:

CATEG.:

PRESS MAT:

WRAP MAT

ICQ

THK

TOS

UCL

WRAP MAT:

ICQ:

AAA

THK:

TOS:

UCL:

Packaging Code Definitions

LVL A Code (LVL_A):E

Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.

LVL B Code (LVL_B): Q

Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI): O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC MKG): 00

No special marking.

Method of Preservation (MOP): ZZ

See j.4.1.B.

Cushion Material (CUSH): XX

Preservation Material (PRESS MAT): XX