3110-00-512-0903

Description: Annular Ball Bearing

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: MIL-C-11796

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

More MIL-C-11796 Parts

MIL-C-11796 Annular Ball Bearing

Spec. Type Spec. Color Gloss Size
Lubrication material document and classification MIL-C-11796

Array Properties

  • NSN:
    Array
  • Description:
    Annular Ball Bearing
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Bore Diameter:
    Between 1.1809 inches and 1.1811 inches
  • Overall Outside Diameter:
    Between 2.1651 inches and 2.1654 inches
  • Lubrication Material:
    Petrolatum
  • Outer Ring Width:
    Between 0.5108 inches and 0.5118 inches
  • Inner Ring Width:
    Between 0.6249 inches and 0.6299 inches
  • Surface Finish:
    Ground
  • Retainer Fabrication Method:
    Machined
  • Load Direction:
    Angular
  • Bore Shape:
    Straight
  • Internal Clearance:
    0.0014 inches radial and 0.0018 inches radial
  • Contact Angle:
    18.5 degrees
  • Special Features:
    Puller flange located on inner ring, 1.4750 in. Min, 1.4850 in. Max dia, 0.0300 in. Min, 0.0700 in. Max w, 0.0400 in. Min, 0.0600 max depth, split inner ring, stabilized for operation at 600 degrees f, c61.0 to c64.0 rockwell hardness rings and balls
  • Lubrication Material:
    Lubricant
  • Lubrication Material Specification:
    Mil-c-11796 military specification single material response
  • Material:
    Steel separator
  • Material Specification:
    Ams 6490 military standard single material response outer ring
  • Precious Material And Location:
    Retainer silver
  • Precious Material:
    Silver
  • Style Designator:
    Non-loading groove, non-separable
  • Test Data Document:
    73342-e1s1515 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 73342-e1s1003 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 73342-e1s1169 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 73342-e1s1523 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Manufacturers and Part Numbers
Part Number
Brand
6876005
Allison Transmission
M106GX20
Barden Corporation
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A702
PICA:
CT
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00014
FIIG:
A044A0
Concept No.:
App. Key:
C
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
S
ESD:
ESD:
MMAC:
---
CRITL:
N
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): S
Item contains silver.
Criticality (CRITL): N
The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
2.3 X 2.3 X 1.0
Pack Weight:
0.2000lbs
Item Weight:
0.2000lbs
Item Dim:
002100210008
Container
OPI
SPI No.
SPI Rev.
Container:
D2
OPI:
A
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
ZZ
LVL A:
Q
LVL B:
Q
LVL C:
U
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
00
MOP:
ZZ
CATEG.:
ZZZZ
PRESS MAT:
09
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
JV
ICQ:
000
THK:
0
TOS:
B
UCL:
O
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): A
Packaging is in accordance with a procedural specification or a special packaging instruction (spi). the appropriate specification number will be shown in the clear in the supplemental data area.
Special Markings Code (SPC MKG): ZZ
Special requirements.
Method of Preservation (MOP): ZZ
See j.4.1.B.
Cushion Material (CUSH): 00
No requirement.
Preservation Material (PRESS MAT): 09
Mil-prf-32033, lubricating oil, general purpose preservative (water displacing, low temperature).