3110-00-400-2788

Description: Cylindrical Roller Bearing

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Unmounted Antifriction Bearings

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

3110-00-400-2788 Properties

  • NSN:
    3110-00-400-2788
  • Description:
    Cylindrical Roller Bearing
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 EA
  • Overall Width:
    Between 0.7037 inches and 0.7087 inches
  • Bore Diameter:
    Between 3.5665 inches and 3.5671 inches
  • Overall Outside Diameter:
    Between 4.7241 inches and 4.7244 inches
  • Surface Finish:
    Ground
  • Retainer Fabrication Method:
    Machined
  • Special Features:
    0.00008 in. Max variation in diameter of rollers
  • Material:
    Steel roller
  • Material Specification:
    Fed-std-66 federal standard single material response roller
  • Style Designator:
    Single row, non-locating, two lip inner ring, cylindrical outer ring with two roller retainment rings on outer, non-separable
  • Test Data Document:
    51600-es9 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38443-es105a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-47168a1 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 51600-es12a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38443-es109a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-47162a7 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-47163a7 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Manufacturers and Part Numbers
Part Number
Brand
206-040-033
Bell Helicopter Textron .
1917UHAR5502
Regal Beloit America
456811
Skf Usa .
MR1917EX1
Skf Usa .
206-040-033-1
Bell Helicopter Textron .
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE ARMY Dept. of the Army
MOE_CD:
DA
MOE_RL:
A702
PICA:
CT
DSOR:
CS
User:
BULGARIA Bulgaria
MOE_CD:
WU
MOE_RL:
WU01
PICA:
WU
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
AUSTRALIA Australia
MOE_CD:
ZA
MOE_RL:
ZA01
PICA:
ZA
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
00015
FIIG:
A044A0
Concept No.:
App. Key:
L
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
MMAC:
---
CRITL:
N
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): N
The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
8.5 X 8.5 X 5.5
Pack Weight:
5.0000lbs
Item Weight:
1.2000lbs
Item Dim:
004800480008
Container
OPI
SPI No.
SPI Rev.
Container:
ED
OPI:
M
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
Q
LVL B:
F
LVL C:
0
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
NA
MOP:
41
CATEG.:
ZZZ0
PRESS MAT:
49
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
JA
ICQ:
000
THK:
A
TOS:
B
UCL:
B
Packaging Code Definitions
LVL A Code (LVL_A):Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
LVL B Code (LVL_B): F
Packing is not required. the unit container shall also serve as the shipping container. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Procedure Indicator Code (OPI): M
All packaging data is mandatory for compliance and no substitutions are permitted. fast packs should be included in this category.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 41
Watervaporproof bag, sealed.
Cushion Material (CUSH): NA
Ppp-c-795, cellular plastic film cushioning; or a-a-3129, open cell plastic cushioning; or ppp-c-1797, polypropylene foam cushioning; or a-a-59136, polyethylene foam cushioning.
Preservation Material (PRESS MAT): 49
Vendor's protective grease or oil coating.