3110-00-088-3399

Description: Duplex Ball Bearing

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Unmounted Antifriction Bearings

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

3110-00-088-3399 Properties

  • NSN:
    3110-00-088-3399
  • Description:
    Duplex Ball Bearing
  • Shelf Life:
    N/A
  • DEMIL:
    NO
  • UOM:
    1 PR
  • Overall Width:
    0.9448 inches
  • Bore Diameter:
    1.5748 inches
  • Overall Outside Diameter:
    2.6774 inches
  • Surface Finish:
    Ground
  • Retainer Fabrication Method:
    Machined
  • Load Direction:
    Angular
  • Internal Fit-up Designation:
    Standard
  • Standard Tolerance Designation:
    Abec no.3
  • Special Features:
    Bearings marked w/same serial no., bearings stabilized for operation at m 65 to p 300 degrees f
  • Material:
    Steel comp e52100 outer ring
  • Material Specification:
    Fed-std-66 federal standard single material response outer ring
  • Style Designator:
    Counterbored outer rings, non-separable, back to back mounting
  • Test Data Document:
    21335-ps33 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 21335-p s36 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38443-qcp-9 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 52676-470377 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Manufacturers and Part Numbers
Part Number
Brand
204-040-424
Bell Helicopter Textron .
M9108WI3NGSRDUTA453S8
Timken Company
456607
Skf Usa .
204-040-424-1
Bell Helicopter Textron .
204-040-424-001
Bell Helicopter Textron .
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
AUSTRIA Austria
MOE_CD:
WB
MOE_RL:
WB01
PICA:
WB
DSOR:
User:
SLOVENIA Slovenia
MOE_CD:
WL
MOE_RL:
WL01
PICA:
WL
DSOR:
User:
POLAND Poland
MOE_CD:
WP
MOE_RL:
WP01
PICA:
WP
DSOR:
User:
BRAZIL Brazil
MOE_CD:
YA
MOE_RL:
YA01
PICA:
YA
DSOR:
User:
SPAIN Spain
MOE_CD:
YB
MOE_RL:
YB01
PICA:
YB
DSOR:
User:
COLUMBIA Columbia
MOE_CD:
YC
MOE_RL:
YC01
PICA:
YC
DSOR:
User:
SINGAPORE Singapore
MOE_CD:
YJ
MOE_RL:
YJ01
PICA:
YJ
DSOR:
User:
CANADA Canada
MOE_CD:
ZC
MOE_RL:
ZC01
PICA:
ZC
DSOR:
User:
NEW ZEALAND New Zealand
MOE_CD:
ZE
MOE_RL:
ZE01
PICA:
ZE
DSOR:
User:
GERMANY Germany
MOE_CD:
ZG
MOE_RL:
ZG01
PICA:
ZG
DSOR:
User:
REPUBLIC OF KOREA Republic of Korea
MOE_CD:
ZH
MOE_RL:
ZH01
PICA:
ZH
DSOR:
User:
ITALY Italy
MOE_CD:
ZR
MOE_RL:
ZR01
PICA:
ZR
DSOR:
User:
NORWAY Norway
MOE_CD:
ZT
MOE_RL:
ZT01
PICA:
ZT
DSOR:
User:
GREECE Greece
MOE_CD:
ZU
MOE_RL:
ZU01
PICA:
ZU
DSOR:
User:
TURKEY Turkey
MOE_CD:
ZW
MOE_RL:
ZW01
PICA:
ZW
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
30213
FIIG:
A044A0
Concept No.:
App. Key:
E
Cond. Code:
1
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
MMAC:
---
CRITL:
F
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): U
Precious metal content is unknown
Criticality (CRITL): F
The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
--
Pack Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
XX
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
LVL A:
E
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
XX
MOP:
ZZ
CATEG.:
PRESS MAT:
XX
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
XX
ICQ:
YYY
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):E
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG):
Method of Preservation (MOP): ZZ
See j.4.1.B.
Cushion Material (CUSH): XX
Preservation Material (PRESS MAT): XX