1680-00-554-6593

Description: Flexible Shaft Assembly

Price Quote

Qty:
Email Address:
Phone Number:
Company:
Privacy    Terms

Quality Assurance

We are commited to quality and satisfaction as a certified supplier in the aerospace and military industries.

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • International Shipping Available
  • Friendly service to back every order
MILSPEC: Miscellaneous Aircraft Accessories And Components

 Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception. Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts. The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)

1680-00-554-6593 Properties

  • NSN:
    1680-00-554-6593
  • Description:
    Flexible Shaft Assembly
  • Shelf Life:
    N/A
  • DEMIL:
    DEMIL/MLI
  • UOM:
    1 EA
  • Thread Class:
    2 both ends
  • Thread Direction:
    Right-hand both ends
  • Spline Major Diameter:
    0.270 inches both ends
  • Overall Length:
    98.163 inches
  • Spline Quantity:
    12 both ends
  • Spline Minor Diameter:
    0.228 inches both ends
  • Thread Depth:
    0.220 inches both ends
  • Tip Length:
    0.521 inches both ends
  • Shank Outside Diameter:
    0.500 inches both ends
  • Pitch Diameter:
    0.250 inches both ends
  • Shoulder Outside Diameter:
    0.562 inches both ends
  • Core Material:
    Steel
  • Screw Thread Series Designator:
    Uns both ends
  • Core Diameter:
    0.276 inches
  • Thread Location:
    Internal both ends
  • End Type:
    Round, internal splined both ends
  • Width Across Flats:
    0.870 inches both ends
  • End Connection Type:
    Threaded internal both ends
  • Spline Pressure Angle In Deg:
    14.5 both ends
  • Spline Length:
    0.250 inches both ends
  • Spline Type:
    Involute both ends
  • Setscrew:
    Not included both ends
  • Casing Material:
    Steel
  • Wrenching Facility Type:
    Hexagon both ends
  • Cross Section Size And Location:
    0.420 inches diameter both ends
  • Torsional Deflection Rating:
    30 degrees ft-lb in.
  • Casing Surface Treatment:
    Zinc coated
  • Casing Length Between Ferrules:
    97.120 inches
  • Casing Outside Diameter:
    0.530 inches
  • Casing Protective Device Type:
    Braided wire shield
  • Swivel End:
    Provided both ends
  • Enddiameter:
    0.620 inches both ends
  • Lubrication Fitting:
    Not provided both ends
  • Corelength:
    98.163 inches
  • Core Rotation Direction:
    Clockwise or counterclockwise
  • Core Removability:
    Nonremovable
  • Minimum Operating Radius:
    12.000 inches
  • Nondefinitive Specification/std Data:
    695694-1 drawing number
  • Fsc Application Data:
    Actuators, mechanical, trim tab
Manufacturers and Part Numbers
Part Number
Brand
695694-1
Kilgore Flares Company
A505-1
Kilgore Flares Company
A505-15
Kilgore Flares Company
Major Organizational Entities (MOE)
Entity
MOE Code
MOE Rule
PICA
DSOR
User:
DEPARTMENT OF THE AIR FORCE Dept. of the Air Force
MOE_CD:
DF
MOE_RL:
FXGG
PICA:
GX
DSOR:
User:
DEPARTMENT OF THE NAVY Dept. of the Navy
MOE_CD:
DN
MOE_RL:
N9BG
PICA:
GX
DSOR:
Part Identification
INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
20315
FIIG:
T246-E
Concept No.:
App. Key:
EA
Cond. Code:
2
Status:
A
Material and Special Handling
Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators
HMIC
PMIC
ESD/EMI
ENAC
MMAC
CRITL
HMIC:
N
PMIC:
A
ESD:
ESD:
MMAC:
---
CRITL:
X
Hazmat (HMIC): N
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Precious Metals (PMIC): A
Item does not contain precious metal.
Criticality (CRITL): X
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Packaging and Dimensions
Package Size
Package Weight
Part Weight
Part Dimensions (approx.)
Pack Size:
999.9 X 999.9 X 999.9
Pack Weight:
--
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
Container:
D3
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg.
LVL A
LVL B
LVL C
SPC Mkg.:
00
LVL A:
E
LVL B:
Q
LVL C:
CUSH
MOP
CATEG.
PRESS MAT
CUSH:
XX
MOP:
10
CATEG.:
60Z0
PRESS MAT:
00
WRAP MAT
ICQ
THK
TOS
UCL
WRAP MAT:
XX
ICQ:
000
THK:
X
TOS:
UCL:
Packaging Code Definitions
LVL A Code (LVL_A):E
Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL B Code (LVL_B): Q
Packing shall be accomplished in accordance with table c.Ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Procedure Indicator Code (OPI): O
Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.
Special Markings Code (SPC MKG): 00
No special marking.
Method of Preservation (MOP): 10
Physical protection.
Cushion Material (CUSH): XX
Preservation Material (PRESS MAT): 00
No requirement.