1005-00-009-8875

410 Gage Shotgun

Hazardous material, precious metals, criticality, environment, and electrostatic discharge indicators.

HMIC HAZMAT (Hazardous Material): N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC Precious Metals: A

Item does not contain precious metal.
CRITL Criticality Code: S

The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.

Part Number	Brand
5298	Fluke Electronics Corp Pomona Electronics Div
5298	Kirkhill Ta Haskon Div
5298	The Stanley Works Dba Stanley Proto
5298	Independent Rough Terrain Center Llc
5298	Dover Corp Elevator Div
5298	Kirkhill Inc Div Kirkhill Inc, Haskon Division
5298	Fluke Electronics Corp
5298	Remington Arms Company, Llc
5298	Bauer Compressors, Inc.
5298	Saint-Gobain Performance Plastics Inc. Dba Saint Gobain Performance Plastics Inc.
5298	Eaton Corporation Dba Airframe Div Fuel & Motion Control Systems
5298	Flexco, Inc
5298	Kalmar Equipment (australia) Pty Ltd

Entity	MOE Code	MOE Rule	PICA	DSOR
Department of the Navy	DN	N2J4	JK	CR
Peru	VP	VP01	VP

PICA SICA	Package Size	Package Weight	Part Weight	Part Dimensions
P	0500 X 0120 X 0040	0009.5	.	000000000000
PICA SICA	Container	OPI	SPI No.	SPI Rev.
P	ED	M
PICA SICA	SPC Mkg.	LVL A	LVL B	LVL C
P	00	E	Q	Q
PICA SICA	CUSH	MOP	CATEG.	PRESS MAT
P	JC	33	ZZZZ	10
PICA SICA	WRAP MAT	ICQ	THK	TOS
P	GB	000	C	A

Packaging Code Definitions

LVL_A: E: Packing shall be accomplished to meet the performance test requirements of astm-d4169, distribution cycle 18, assurance level 1.
LVL_B: Q: Packing shall be accomplished in accordance with table c.ii for the packing level specified. Closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
OPI: M: All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
SPC_MKG: 00: No special marking.
MOP: 33: Greaseproof-waterproof bag, sealed.
CUSH_DUN: JC: Astm-d4727, domestic fiberboard used as pads, cells, die cuts or sleeves.
PRES_MAT: 10: Mil-prf-21260, preservative and break-in lubricating oil, internal combustion engine, grade 10, 30 or 50.

Export Restrictions

Any part(s) quoted or sold by MilSpec.parts and re-sold (to a third party) CANNOT be sold to a USA embargoed country, company, entity, or person(s). Depending on the ECCN, these commodities may require export license or exception.
Diversion contrary to U.S. law is prohibited. Unless otherwise noted, this sale, order or quote may include Munitions List Items (MLI) or Commerce Controlled List Items (CCLI). MLI/CCLI property is controlled by the US Government and in many cases cannot be transferred (exported, sold or given) to a foreign country, a non-US Citizen/National or a non- Permanent US Resident without a valid State/Commerce Department export authorization. It is the responsibility of (the Purchaser) to determine what the applicable requirements may be, to obtain all necessary authorizations, licenses or approvals and are subject to both review and acceptance by MilSpec.parts.
The use, disposition, export and re-export of the property covered or included in this sale, order or quote is subject to the provisions of law referenced in End-Use Certificate DLA form 1822, DEC 2001, including, but not limited to, the Arms Export Control Act (22 USC 2751 et seq.); Export Administration Act of 1979 (50 USC App. 2401 et seq.) as contained under Executive Order 12924; International Traffic in Arms Regulations (22 CFR 120 et seq.); Export Administration Regulations (15 CFR 730 et seq.); Foreign Assets Control Regulations (31 CFR 500 et seq.) and the Espionage Act (18 USC 793 et seq.)