MilSpec.parts

MIL-STD-1261 Parts

Page 1 of 2
5340-01-612-5737 Fastener Pawl

Two-piece welded assy,includes 10887413 and 10905198; weld iaw mil-std-1261,cl 1; protective treatment/finish iaw mil-p-16232,ty z,cl 1

5340-01-596-8319 Mounting Bracket

Mil-std-1261 mil std single material response

5340-01-596-8160 Mounting Bracket

Mil-std-1261 mil std single material response

5340-01-276-2155 Mounting Bracket

Item consists of 1 bracket p/n 12332759-3 and 2 brace p/n 12351717-2;weld per mil-std-1261 class 1;length 9.980 inches

5340-01-257-3873 Mounting Bracket

Bracket-upper; weld per mil-std-1261,class 3; apply part no. Per mil-std-130

5340-01-251-8575 Mounting Bracket

Carbon steel bar,hot rolled pickled and oiled,grade m1010-m1012;2 legs 2.71 in. Lg,0.190 in. H,1.030 in. W,formed to opening height 0.280 in.;leg ends chamfered 45 deg;2 coaxial holes 0.452 in. Dia,0.50 in. From edge to hole center along length,0.50 in. From edge to hole center along width;first leg hole countersunk with 0.65 in. Dia;second leg hole has plain hex nut welded to external side per mil-std-1261 class 2;finish:clean and treat per type i or iii,spec tt-c-490,followed by carc coating no. P1.1 of dwg. 9399999

5340-01-185-0161 Retaining Strap

Includes one spacer p/n 10891391 welded per mil-std-1261,class 2

5340-01-174-0489 Manual Control Lever

Dsteel,carbon;13.375 in.Lg.;handle,12332542,welded on one end to lever,12332543;shaft,12332541 welded to opposite end of lever;weld per mil-std-1261,class 2;see drawings p/n's 12332540,41,42 and 43

5340-01-149-1364 Mounting Bracket

Consist of 1-plate-12291329-4 oa length 10.440 in,oa width 6.000 in; 1-plate-12291329-3 oa length 12.620 in,oa width 11.190 in; material,steel,carbon,structural spec qq-s-741 0.250 in thick;weld in accordance with mil-std-1261,class 1

5340-01-149-1363 Mounting Bracket

Consist of 1-plate-12291329-4 oa length 10.440 in,oa width 6.000 in; 1-plate-12291329-3 oa length 12.620 in,oa width 11.190 in; material,steel,carbon,structural spec qq-s-741 0.250 in thick;weld in accordance with mil-std-1261,class 1

5340-01-094-9007 Manual Control Handle

Steel,carbon,tubing;17.81 in.Lg;seamless or welded sae 1022-1025 spec qq-t-830;.84 o.D. X .076 wall thickness;weld per mil-std-1261 class i,apply part no.Per mil-std-130;

5340-01-070-3186 Mounting Bracket

Jmaterial:for part number 12012161-1 steel carbon per astm a36; material:for part numbers 12012161-2,-3 and -4 steel,carbon 1018 per astm a108; weld in accordance with mil-std-1261,class 1; o/a length 29.250 in

5340-00-901-1510 Mounting Bracket

Consists of 1 bracket,p/n 19207 10870914 and 1 block,p/n 19207 10893635;weld in accordance with mil-std-1261,class 1,prime per spec mil-p-52192 0.0009 to 0.0014 thick,air dry

5340-00-837-1583 Mounting Bracket

Consists of 1ea plate fscm 19207 p/n 10893811; 1ea bracket fscm 19207 p/n 10893804;item is of welded construction and used on driver's seat assembly(p/n 10911443);weld in accordance with mil-std-1261,class 1

2990-00-706-1105 Exhaust Pipe

Mil-std-1261 mil std single treatment response