MilSpec.parts

MIL-PRF-5606 Parts

Page 1 of 1
5330-01-648-4176 Wiper Ring

Operating pressure: 5,000 psi; proof pressure: 7500 psi at a temp range from ?65f to +275f burst pressure: 12500 psi at +275f operating fluid: mil-prf-5606, mil-prf-83282, and/or mil-prf-46170; dynamic condition: linear; sealing mode: dynamic

9150-01-621-8614 Petroleum Base Hydraulic Fluid

Royco 756, mil-prf-5606, 55 gallon drum

1650-01-603-8851 Fluid Filter Element

Temp ratings listed are based on boeing bms 3-11, type iv hydraulic phosphate ester(skydrol/hyjet); ratings for mil-prf-5606 & mil-prf-83282(pti p/n 7552130 w/buna n o-ring) will be -65.0 deg f to +275.0 deg f.

4910-01-588-2683 Pneumatic Tire Bead Breaker

12 adjustable breaker pads,12 to cyclinder driven by 80 psi to 120 psi 5.5 to 8.3 bar) pneumatic pump adadjutble rim sizes 10 inches to 28inches25 to 71 cm) mil-prf-5606 hydraulic fl

4920-01-571-0446 Hydraulic Dispenser

2 gallon fluid dispenser mil-prf-5606

6115-01-566-9209 Power Unit Envelope

Plug/cap all ports iaw nas847; ambient temp range minus 50 deg f to plus 120 deg f using mil-prf-5606 hydraulic fluid; pressure-generate up to 4350 psi of hydraulic pressure; name on dwg-envelope,hp206 power unit cab tilt

1730-01-562-3859 Aircraft Landing Gear Jack

Wight 213lbs,operating pressure8060psi,relief vlave setting 8910psi,fluild temp tange -35 to 230 f,system op erating range -35 to 120f, normal operation mil-prf-5606 ormil-prf-83283,artic operation mil-h-81019

4910-01-515-3483 Pneumatic Tire Demounter

Not to exceed 2000 lb weight; spider plate assembly or universal spider assembly type; mil-prf-5606 hydraulic fluid; one person operation; both beads of tire broken in one-stroke with no destruction of tire

4910-01-514-9925 Pneumatic Tire Demounter

Not to exceed 2000 lb weight; spider plate assembly or universal spider assembly type; mil-prf-5606 hydraulic fluid; one person operation; both beads of tire broken in one-stroke with no destruction of tire